Fcs2 Power Twin+1 Pg Picante

Fcs2 Al Merrick Pc Aircore Tri Fins

Fcs2 Al MerricK Performance Core Tri

Al Merrick's 'AM' shaper fin in ultralight AirCore. Raked side fins produce exceptional speed and drive.

Overview

Al Merrick's template is designed for radical, progressive surfing.
The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
Updated PC construction featuring our ultralight AirCore.

Ideal Conditions

Hollow steep waves, punchy beach breaks.

Board Types

Designed to fit the FCS II Fin System.
Performance boards with deep concaves and moderate-to-extreme rocker.

Fin Family

Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core + AirCore

Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.

AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

$199.00

Fcs2 Mf Neo Carbon Large Tri Blk/char

Mick Fanning's signature FCS II MF fin in premium PC material for controlled powerful surfing.

Overview

Mick's fin in premium pc material delivers a dynamic, yet very controlled feel when performing powerful turns.
Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.
This fin provides maximum drive and control.

Ideal conditions
Open face, down-the-line waves, particularly good in point and reef breaks.

Board types
Designed to fit the fcs ii fin system.
Recommended for performance shortboards with moderate-to-extreme rocker.

Fin family
Carver: find power. Powerful, drawn-out turns with added hold.

$139.95

Fcs2 Reactor Pc Tri Fins

Speed âÂÂÂÂÂÂ& tight turns. Ideal for beach breaks.

Overview

Designed for speed and tight turns, with added tail release.
Upright template allows for tighter, more acute directional changes.
Smaller centre fin for increased pivot and tail release.
Ideal for surfers who like to perform fast, progressive turns.

Ideal Conditions

Suitable for hollow waves, particularly good for beach breaks.

Board Types

Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-low rocker.

Fin Family

Reactor: Find Speed. Speed, tight turns & snaps.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

$179.00

Fcs2 Performer Performance Core Tri - Teal Black

FCS2 Performer Performance Core Tri - Teal Black

Balance of speed, flow and response. Suitable for all conditions.

Overview

Designed for a balance of speed, flow & response.
Well proportioned template with Inside Foil Technology (IFT).
Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.

Ideal Conditions

A wide range of conditions from beach breaks to point breaks.

Board Types

Designed to fit the FCS II Fin System.
Recommended for all board types.

Fin Family

Performer: Find Balance. A balance of speed, flow & response.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg

$179.00

Fcs2 Performer Pc Carbon Tri Fins

Balance of speed, flow and response. Suitable for all conditions.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

Designed for a balance of speed, flow & response.
Well proportioned template with Inside Foil Technology (IFT).
Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
New Linear Flex: 3D Twist and roll action delivers a smoother feel.

Ideal Conditions

A wide range of conditions from beach breaks to point breaks.

Board Types

Designed to fit the FCS II Fin System.
Recommended for all board types.

Fin Family

Performer: Find Balance. A balance of speed, flow & response.

Performance Core Carbon

Our new PC Carbon construction with ‘Linear Flex’ produces a 3D twist & roll action resulting in a fast, super responsive fin that feels much smoother through turns. PCC fins suit fast surfing and are favoured by more advanced surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg

$199.00

Fcs2 Carver Pc Carbon Tri Fins - Large

Powerful, drawn-out turns. Excels on open face waves.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

Designed for powerful, drawn-out turns with added hold.
Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
Ideal for power surfers who like to push hard against their fins and draw out their turns.

Ideal Conditions

Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

Designed to fit the FCS II Fin System.
Recommended for boards with deep concaves and moderate-to-extreme rocker.

Fin Family

Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core Carbon

Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

$199.00

Fcs2 Mick Fanning Pc Med Tri White

Overview

Mick's fin in premium PC material delivers a dynamic, yet very controlled feel when performing powerful turns.
Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.
This fin provides maximum drive and control.

Ideal Conditions

Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-extreme rocker.

Fin Family

Carver: Find Power. Powerful, drawn-out turns with added hold.

$209.95

Fcs2 Js Modern Keel Pg

Fcs2 JS Modern Keel

The flow of a traditional twin fish with the control of a performance quad.

The JS Modern Keel is an upright keel template designed for the JS Red Baron and other specialty fish shapes. Featuring a wide base and a relatively small sweep (rake), this high area keel provides control through the face and pivot in a tight radius.

Overview

Upright keel template designed for traditional fish shapes.
Lower sweep (rake) than most conventional, wider based keels which allows it to pivot in a really tight radius.
High area and depth not only delivers a feeling of control when pushed harder on the open face, but helps to maintain tremendous speed through roundhouse cutbacks.
Black & White in Performance Glass

Board Types

JS Red Baron - The Red Baron, part of the Baron family, has a shorter and wider template with plenty of volume in the tail. It's tail width allows for speed generation through flatter sections as well as a deep double concave, this board was made with the JS Modern Keel template in mind.
Designed to fit the FCS II Fin System.
Recommended for all board types including fish, funboard and twin fin boards.

Performance Glass

Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

X-LARGE (One size suits all)

$199.00

Fcs2 Retro Keel Pg Twin - Black

Fcs2 Retro Keel Twin Fins - Black

Low aspect keel twin designed for fish shapes. Fast and loose with minimal drag.

Overview

Low aspect keel template designed for fish shapes with contemporary outlines and concaves.
Lowest area keel in the FCS range.
Feels fast and loose with minimal drag, and encourages a more progressive and radical approach to riding a fish.

Board Types

Designed to fit the FCS II Fin System.
Recommended for all board types including fish, funboard and twin fin boards.

Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

X-LARGE (One size suits all)

$189.00

FCS II Carver PC Tri Fin Set - Eucalyptus

Powerful, drawn-out turns. Excels on open-face waves.

Overview

Designed for powerful, drawn-out turns with added hold.

An elongated template with a high degree of sweep provides exceptional hold off the bottom and when carving on the open face.

Ideal for power surfers who like to push hard against their fins and draw out their turns.

Ideal Conditions

Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

Designed to fit the FCS II Fin System.

Recommended for boards with deep concaves and moderate-to-extreme rocker.

Fin Family

Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.

MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

Fin	Base (inches)	Base (mm)	Depth (inches)	Depth (mm)	Area (inches)	Area (mm)	Sweep Deg°	Foil
MED	4.47	113	4.54	115	14.96	9650	37	Flat
LRG	4.58	116	4.66	118	15.73	10150	37	Flat
XL	4.69	119	4.77	121	16.51	10650	37	Flat

$179.00

Fcs2 Mf Pc Medium Tri Blue/black

FCS II Mick Fanning PC Medium Tri Fin - Blue/Black

Mick Fanning's signature FCS II MF fin in premium PC material for controlled powerful surfing.

Overview

Mick's fin in premium PC material delivers a dynamic, yet very controlled feel when performing powerful turns.
Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.
This fin provides maximum drive.

Ideal Conditions

Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-extreme rocker.

Fin Family

Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)

$199.00